And she's done

On her way home after having its friend dropped off: http://southpawcoupe2.blogspot.co.uk/

Finishing bits

 

New Nuts

 

Trackrods repaced

 

Battery tray came out well compared to how it was

 

Wheels on means only one thing, that corners done :)

Underseal - Man it makes a difference

Time to add some protection

CV Boots

Nothing ever goes easy on old cars and these cv boots were not easy.

As soon as the first one came off the bits started falling off.

 

New short shaft finally arrived

 

Slotted nicely into the gearbox, i love new stuff

 

Sump Gasket

Noticed a little shiny moisture above the gasket line so it was decided it should be done.

So pulled the sump off and had a very strange surprise waiting for me. Strange things hanging out of the oil pick-up.

 

This was what was pulled out of it. Good to see it doing its job.

 

So lets pre the sump because it looks a little nasty.

 

 

That just wouldn't do, so out with the wire brush again....

Much better!

Time for block cleaning.

 

 All back together

 

 

Then finiehed of with a little satin black to finish the job.

 

 

time for some cosmetics

old one was fine but while everything else is being tarted up why not the grille.

Was meant to be a sprae but hey new mirror

Replacement Genuine Rover/MG LHD Headlamps fitted.

 Daylight running light fitment.

Started the polybushes on freshly  powder coated parts.

 

 

old vs new Anti role bar with polybushes fitted and powder coated hangers and bush holders.

 

 

Was hoping not to need to change the main bushes but they were shot.

This meant we needed the trailing arms off, which meant disassembly of the abs system, calipers and the remaining bushes that holds the arms on.....fun.

 

 

 

Test fit on the DRL

Wiring fed through the grille

 

Fuse cable tied into place to make sure its accessable.

 

 Secured cabling

Fitting of passenger side and running the wires to the live cables.

 Cables secured and made to look pretty and more importantly out of site.

 Front assembly completed and front subframe, torque steer arms, lower control arms fitted

 After finishing the wiring for the DRL we could finally finish the passenger side with its splitter and repairs to the arch lining.

 Rear anti-roll bar fixings with poly bushes

 First of the wet items hit the car as well.

More will follow